Specifications

Rosen Aviation 19” HD Widescreen Display
Document Number: 104328
Revision: C
Date: 03/11/14
Template: 4.4.1.6FM2; Revision A; 12/06/12
Page 5 of 34
1. INTRODUCTION
This manual describes how to install the Rosen 19” High-definition Widescreen displays with
integrated electronics onto your aircraft. It contains everything you need to know to wire the
display and confirm that it is functioning correctly.
Note: Only trained and qualified personnel should perform installation and service.
1.1. Unpacking
The 19” displays ship with an RC5 remote control (P/N 0500-019).
1.2. Additional System Materials
Drawings for the Rosen Model 1900 displays are available on the Rosen website at
www.rosenaviation.com.
From the Rosen Aviation home page, select the ProductsDisplaysHigh Definition
Displays tab and browse by product size.
An optional universal color display remote control (sold separately) is compatible for use with the
1702 series displays. Please contact Rosen Sales for P/N availability.
1.2.1. Connector Kits
The following connector kits (sold separately) are recommended for optimal performance:
 Connector kit—26-pin female (P/N 0300-043)
 Connector kit—25-pin female D-sub (P/N 0300-052)
 CVBS and SDI connector kit—BNC (P/N 0300-051)
 Component/RGB, digital HDMI/DVI connector kit—25-pin (P/N 0300-029)
2. VIDEO INPUTS
The 1900 series displays enable viewers to watch high-definition video as well as standard-
definition video. Available video inputs include the following:
 2 HD-SDI inputs
 2 composite (CVBS)
 2 DVI inputs (HDMI)
 RGB & Component (YPbPr) - through the DVI connectors only
 Accepts inputs up to 1080p, VGA-WUXGA
Control inputs for these units are via an IR (infrared) remote interface, RS-232, or RS-485 external
inputs. The display connects to 28VDC aircraft power and receives video through a video
distribution amplifier or directly from video sources.