Specifications

Rosen Aviation 19” HD Widescreen Display
Document Number: 104328
Revision: C
Date: 03/11/14
Template: 4.4.1.6FM2; Revision A; 12/06/12
Page 16 of 34
7.3.6. Sharpness
To adjust the picture sharpness, press the MENU button and the ▼ arrow to select
Image AdjustSharpness, and then press ENTER to open the screen below.
Press the ◄ or the ► button to adjust the focus.
Press ENTER to set the sharpness and close the control bar.
Press EXIT to close the OSD.
Figure 15 Sharpness control bar
7.3.7. Reset Scheme
Restores the values of the current scheme to their default settings, and it affects only the
current source. Use Reset Scheme to revert to the default screen colors if the other
Image Adjust options did not correct the screen quality changes that you expected.
Select Image AdjustReset Scheme and then press ENTER.
Press EXIT to close the OSD.
For information about the different scheme modes, see Section 7.2.3 on page 13.
7.3.8. Image Adjust Advanced (Submenu)
Use the Image AdjustAdvanced submenu options, as shown below, to fine tune the
primary screen colors and to restore the monitor’s factory screen settings. Press the
MENU button and the ▼ arrow to select Image AdjustAdvanced, and then press
ENTER to open the menu.
To close the menu, select the Back option, or press EXIT to close the OSD.
Figure 16 Advanced submenu options
}
RGB options
only