Specifications

External Control Interface (0300-406)

The external control interface is a 9-pin standard density

D-subminiature male connector.

Pin Control Signal

1 Ground (SIGNAL RET)

2 RESERVED

3 MENU DOWN / SELECT

4 ADJUST +

5 POWER ON / OFF

6 RESERVED

7 RESERVED

8 ADJUST -

9 MENU ON / OFF

Note: Base Receptacles sold separately.

* Note: If monitor is a select switch version then

pins 4 & 5 are normally open and closed for

200 ms when the select switch is pressed.

If monitor is not a select switch version

then pins 4 & 5 are internally connected.

Pinouts

Pin # Monitor Signal

1 Select Switch Return

2 +28V DC Input

3 Select Switch

4 DC Return

A1 Signal Video Signal Input

A1 Shield Video Ground

Shell Chassis Ground

(Available in Bulkhead only)

8402-001 Main Connector Pinout

Connector: 5W1 Combo-D MALE

Mate: 5W1 Combo-D FEMALE