Specifications

15
Technician mode
Technician mode provides the ability to customize the
Menu by restricting access to specified options. This
section describes how to enter and exit technician
mode and how to customize the main menu.
1. Entering technician mode:
Apply 28V to the monitor, wait until green light appears
( if monitor is in auto-off, press the power button ). Once
the monitor is powered up and the green power light is
on, press the power button briefly to turn it off, then
press and hold the power button down for 10 seconds
and release it. ( More than 10 seconds is OK ). The
monitor will now be operating in technician mode. To
verify the monitor has entered technician mode, press
the “menu” button and you should see the word “on” or
“off” to the left of each menu item in the main menu.
Example of main menu when starting technician mode:
n
On Brightness
On Contrast
On Color
On Tint
On Sharpness
On Backlight
Off Advanced >>
2. Exiting technician mode:
To exit the technician mode, simply turn the power off and on
again either with the power button or through the 28V supply.
Technician Mode