Specifications

Page 4 Rosen Aviation Displays
Warning!
This Display is for Entertainment
Purposes Only! Connect to the Non-
Critical Power Bus.
Pinouts
Pinout descriptions are provided to assist in the wiring
process. Pay close attention to the pinout information while
completing wiring connections.
Main Interface Connectors
The 6.5 SlimLine has either one or two main interface
connectors, depending on the SlimLine base receptacle
model you purchased. The following tables list main
interface connectors and mating connectors per base
receptacle model.
SlimLine Base Receptacle Models:
0100-002, 0100-004, 0100-041, and 0100-042
Connector: 9 Pin Male D-Subminiature
Mate: 9 Pin Female D-Subminiature
Rosen Connector Kit part number 0300-022
Pin # Monitor Signal
1 Chassis Ground
2 +28V DC
3 DC Return
4 Select Switch*
5 Select Switch Return*
6 Reserved
7 Video Signal Input
8 Video Ground
9 Reserved
Pinouts
*Pins 4 and 5 connect to a momentary relay switch for
external control. For example, it can be connected to a
cabin management system for video source switching.