Specifications

6.5” SlimLine LCD Page 11
Hours This option displays the hour and
minutes of the display’s life
SW Rev This option displays the current
software revision
Power Cycles This option displays the number of
times power has been cycled
Source This option displays the current
selected video standard (NTSC/PAL/
SECAM)
Select Switch Adjust Relay Active Time to set the
time delay when pressing the Select
Switch to change video sources
Adjust Repeat Delay to set the time
delay when pressing and holding the
Select Switch to change video
sources
Monitor Info Scroll to this selection’s sub-menu to
view monitor information (see below)
Back Select this option to return to the
Advanced menu
Operation
Advanced Menu
Options Description
Video Formats
Sub-Menu Options Description
Use display buttons to select
between the two choices of auto
detection. The Display will
automatically detect and switch to
the input video standard*
Back Select this option to return to the
Advanced menu
Monitor Info
Sub-Menu Options Description
NTSC/PAL/SECAM
or
NTSC/PAL Only
continued...
*If the image is black and white when switching from SECAM
to PAL video standard, press the Select switch