Specifications

Rosen Aviation 17” SlimLine Display with DVI Input
Document Number: 102031
Revision: B
Date: TBD
Template: 4.2-3-6-FM; Revision D; 13 March 2008 Page 8 of 18
3.1.1. Main Connector Functions
Signal
Input/Output
Description
+28V, 28V
Return
Input
Aircraft power supply
IR +5V, IR GND
Output
Power for optional External IR receiver
IR Signal
Input
IR receiver signal input
RGB/Video
Select Switch
Input
TTL level input. Used to select which input (RGB or
Composite) is displayed. Method of selection set by DIP
switches. Refer to DIP Switch Option Selection on page
10.
Status Output
Output
TTL level output indicates display is powered on when
logic High (Max. current draw is 10 milliamps)
H-Sync, V-Sync
Input
RGB graphics input, TTL level
Computer Sync
GND
Input
Reference ground for RGB sync
Digital GND,
pins 15, 16, 17
Input
Common digital ground connection, connected to
Computer sync GND
A1 Signal/Shield
Input
Red graphics input, 1 Vpp, 75 ohm
A2 Signal/Shield
Input
Green graphics input, 1 Vpp, 75 ohm
A3 Signal/Shield
Input
Blue graphics input, 1 Vpp, 75 ohm
A4 Signal/Shield
Input
Composite video input, 1 Vpp, 75 ohm
3.1.2. External Control Interface (0300-402)
The external VIP control interface is a 9-pin standard density D-subminiature male
connector. Each function can be activated by a momentary connection to ground.
Pin #
Signal
1
Power On/Off
2
Source Select
3
NC
4
Up
5
Down
6
Menu Select
7
Left
8
Right
9
Ground
Rear view of the External Control Connector