Specifications

17” Slimline LCD Page 11
Installation Instructions
Warning! Maximum screw penetration depth:
Top .75 inches
Bottom .75 inches
Sides .75 inches
Rear .50 inches
Note: Each mounting hole includes a 10-32 screw. To install the monitor,
remove only the screws that will be used to install the monitor. Do not
remove the 4-40 flathead screws.
Note: Application requires listed connector backshell (Positronics
D37000GVL-1023.0) due to space constraints and 21WA4 combo
connector.
Natural Convection Installation
There are three display venting configurations
recommended for a natural convection installation:
Option A = Top and Bottom, or
Option B = Top and Rear, or
Option C = Top, Bottom, and Rear
Design considerations:
• Display vents on selected surfaces should be
unobstructed.
• Airway before display vents should be clear of
obstructions for a minimum distance of 1".
• Airway before display vents should be clear of
bends for a minimum distance of 1".
• Airway inlet(s) or outlet(s) should have a
minimum open area of 4 sq in.
MONITOR REAR