7 1700 1700
Table of Contents Introduction and Monitor Overview .................. 3 Monitor Diagram ................................................. 4 Pinouts ................................................................ 5 Main Interface Signal ........................................................ 5 External Control Interface ................................................. 8 RGB or Composite Video Option Selection ...................... 9 Installation Instructions ...................................
1020 Owen Loop South Eugene OR 97402 541-342-3802 www.rosenaviation.com Doc # 9000677 Rev.
Introduction and Monitor Overview Introduction and Monitor Overview Welcome to the 1700 Technical Manual for the 17" Slimline LCD monitor.
Monitor Diagram Monitor Diagram Outline Dimensions FRONT Page 4 Rosen Aviation Displays
Pinouts Pinouts Pinout Document Number 9000493 Main Interface Signal The input connector on this monitor is a 21W4 Male Combo D-subminiature with 17 Size 20 contacts (standard density D-sub) and four Size 8 coaxial contacts, mounting in a Size 4 D-subminiature shell. Recommended mating connector: ITT Cannon: P/N DCA21WA4SA197FO. Note: Backshell of main connector is chassis ground.
Pinouts A1 Signal Red A1 Shield Red return A2 Signal Green A2 Shield Green return A3 Signal Blue A3 Shield Blue return A4 Signal Composite video A4 Shield Composite video return Description of Operation Signal Input/Output Description +28V, 28V Return Input Aircraft power supply IR +5V, IR GND Output Power for optional IR receiver IR signal Input IR receiver signal input RGB/Video select switch Input TTL level input. Used to select which input (RGB or Composite) is displayed.
Pinouts Signal Input/Output Description A1 signal/shield Input Red graphics input, 1 Vpp, 75 ohm A2 signal/shield Input Green graphics input, 1 Vpp, 75 ohm A3 signal/shield Input Blue graphics input, 1 Vpp, 75 ohm A4 signal/shield Input Composite video input, 1 Vpp, 75 ohm 17” Slimline LCD Page 7
Pinouts External Control Interface (0300-402) The external VIP control interface is a 9-pin standard density D-subminiature male connector.
Pinouts RGB or Composite Video Option Selection The monitor can be configured to switch between RGB or Composite video using DIP switches located near the input connectors. The DIP switch selection is detected only at power on. Operation is as follows: SW1 SW2 On Off SW3 - Function Constant Ground Switching. Monitor displays RGB when pin 6 of the main interface connector is held to ground. Monitor displays Composite video when pin 6 of main interface connector is held High (5 V max.).
Installation Instructions Installation Instructions The monitor can be mounted from any combination of two sides.
Installation Instructions MONITOR REAR Warning! Maximum screw penetration depth: Top .75 inches Bottom .75 inches Sides .75 inches Rear .50 inches Natural Convection Installation T here are three display venting configurations recommended for a natural convection installation: Option A = Top and Bottom, or Option B = Top and Rear, or Option C = Top, Bottom, and Rear Design considerations: • Display vents on selected surfaces should be unobstructed.
Operation Operation Power Status LED The front switch panel includes a power status LED. LED StatusDescription Green Monitor is on. Red Monitor is in Standby mode. Front Switch Panel Features To operate the 17" LCD monitor, use the front switch panel buttons shown below. (External controllers or IR remote control options available separately.) Status LED 1 2 3 4 1 Menu/ Sel Press to view the OSD Main menu and to select the highlighted menu option.
Operation On Screen Display (OSD) Main Menu The On Screen Display (OSD) provides a set of menus that enable you to adjust or view monitor features. Main menu selections lead to submenus with additional choices. Press the Menu button on the switch panel to see the Main menu. Menu option Description Source Select Analog RGB or Composite video signal source. Display Image quality control. Adjust contrast, brightness, saturation, hue in Composite video. Adjust brightness, contrast, in Analog RGB.
Operation Display Submenu Choose “Display” from the Main menu to adjust monitor features, described below. Menu option Description Brightness 40-step brightness control. Contrast 40-step contrast control. Saturation Composite video only. Adjust color tone. Hue Composite video only. Adjust color tint. Scaling/Position & Size Control Submenu Choose “Scaling” (Composite video) or “Position & Size Control” (Analog RGB) from the Main menu to see the submenu, described below.
Operation Picture in Picture Control Submenu Choose “PIP Control” from the Main menu only when Analog RGB video is selected to see the PIP submenu, described below. Menu option Description PIP Size Select small, medium, or large to turn on PIP and select a window size. Select PIP off to turn off PIP. PIP Horizontal Position Press to move the PIP window left or right. PIP Vertical Position 17” Slimline LCD Press to move the PIP window up or down.
Troubleshooting Troubleshooting If the monitor does not function properly, refer to the following troubleshooting table for symptoms and possible solutions before contacting Rosen field support. Note: Always use an oscilloscope to verity the video signal. Always use a multimeter to verify voltages. Check actual results against the requirements described in this manual. Problem Possible Solutions No video • Verify that the video source is on and has a tape or DVD installed.
Troubleshooting Problem Image flickers Possible Solutions • Verify that the signal cable is secure. • Verify that the vertical frame frequency is 75 Hz or less. If using the monitor with a PC in Windows, change the Display Control Panel to 60 Hz to achieve the best performance. Image is distorted • Verify pinouts. • Verify that a signal is reaching the monitor using an oscilloscope or another monitor. • Examine the monitor for pinched or damaged cables.
Specifications Specifications LCD Performance Screen Resolution (pixels) 1280 w x 1024 h Display Viewing Area 337.9 x 270.3mm (13.30 x 10.64 inches) Viewing Angle Horizontal ±80º Vertical ±80º Contrast Ratio 350:1 Backlight Lamp Life (hours) 50,000 Screen Brightness 200 cd/m2 (250 measured) Mechanical Packaging Weight Power Requirements Video Performance Video Standards Graphics Standards Video input Operating Temperature Warranty Page 18 8 lbs ± 5% 28VDC 40W max.
Disclaimer 17” Monitor DO-160D Test Matrix Section 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Description Temp & Alt Temp variation Humidity Op shock & crash safety Vibration Explosion Proofness Waterproofness Fluids Susceptibility Sand & Dust Fungus Resistance Salt Spray Magnetic Effect Power Input Voltage Spike AF Cond Suscept – Pwr Induced Signal Suscept RF Suscept (Cond&Rad) Emission of RF Energy Lightning Induced Trans Lightning Direct Effects Icing Electrostatic Discharge Category
Disclaimer All information, including illustrations, is believed to be reliable. Users and/ or installers, however, should independently evaluate the suitability of each product for their application. Rosen makes no warranties as to the accuracy of completeness of the information, and disclaims any liability regarding its use or installation.