Specifications

Rosen Aviation Smart Remote Display System
Document Number: 106957
Revision: A
Date: 03/13/14
Template: 4.4.1.6FM2; Revision A; 12/06/12
Page 9 of 24
 Attach the 32” cosmetic back to the bulkhead using six #6 100 FHP screws
(customer supplied).
 Attach the 42” cosmetic back to the bulkhead using ten #6 100 FHP screws
(customer supplied).
 Attach the 55” cosmetic back to the bulkhead using twelve #6 100 FHP screws
(customer supplied)
Figure 4 3201-800, 4201-800, and 5501-800 cosmetic back mounting bracket
4.2. Attaching an RDM to a Cosmetic Back
Figure 5 shows an exploded view of a proud-mount assembly. Align the four tabs on the RDM
with the four mounting brackets on the cosmetic back. Secure with two 4-40 fasteners in each
tab/bracket. For more dimensional information, see the technical drawings for your specific
assembly.
Figure 5 RDM with a proud-mount bezel assembly
Attach to
bulkhead
Attach to
RDM
Mounting brackets
on the cosmetic
back