Specifications

Rosen Aviation Smart Remote Display System
Document Number: 106957
Revision: A
Date: 03/13/14
Template: 4.4.1.6FM2; Revision A; 12/06/12
Page 7 of 24
2.1. Smart RMEB Configurations
The Smart RMEB has several possible operational mode configurations, depending on the
specific aircraft installation. The unit has four possible media inputs (HDMI, SDI, Streaming
Video over Ethernet, or USB), two possible video outputs (RDM and a peripheral SDI Display),
and a single analog audio output for consistent sound quality at any volume. Additionally, the
system can play media from the internal solid-state storage drive.
During typical operations, a single media source is selected as the priority output at any given
time, and the priority media source can be simultaneously distributed to (either one or both of)
the displays and the audio output device. (Note: Rockwell Collins’ cabin management system
has the ability to disable either display.)
3. REMOTE DISPLAY MODULE INSTALLATION GUIDELINES
3.1. Mounting Configurations
Remote Display Modules (RDMs) have three distinct mounting options: flush mount, semi-proud
mount, and proud mount configurations. The RDMs can be flush mounted, mounted with a sleek
bezel (semi-proud), or proud-mounted between a bezel and cosmetic back. The photos below
are representative of the different bulkhead mounting options for the remote displays. Please
contact your sales associate for specific configurations.
Figure 2 Mounting options for RDMs
 Flush mount – RDM only
 Semi-proud mount – RDM with bezel
 Proud mount – RDM with bezel and a cosmetic back
Flush mount
Semi-proud mount
Proud mount
Cosmetic back
Front bezel
RDM