Specifications
Rosen Aviation Smart Remote Display System
Document Number: 106957
Revision: A
Date: 03/13/14
Template: 4.4.1.6FM2; Revision A; 12/06/12
Page 20 of 24
Table 5 Part numbers referenced in the manual
Product
Part Number
Location
Smart RMEB Outline & Installation
Drawing 0700-150
0700-150-CD
Contact Rosen Technical Support
Smart RMEB Rockwell DEU - 310
441-2028-100
Contact Rockwell Collins’ Customer
Support
Interconnect Cable Specification for
Venue System Remote Electronics
107175
Contact Rosen Technical Support
8.2. Cleaning the Displays
To clean the LCD, very gently wipe the screen with a clean, commercially approved LCD
cleaning cloth and alcohol-free LCD cleaning solution. Use one firm cleaning motion instead of
circular or repeated side-to-side scrubbing.
8.3. RTCA DO-160G Qualifications for Displays
The table below shows the DO-160G compliance of the Smart Remote Display System, unless
otherwise noted. Omitted categories are not applicable to this product or its expected installation.
Reference the Qualification Test Report for specific details.
Table 6 The remote display system is compliant with the following DO-160G test criteria
Description
Section
Category
Comments
Temperature and Altitude
4
Ground Survival/Short-Time Operating
Low Temp
4.5.1
A1
Operating Low Temperature
4.5.2
A1
Ground Survival/Short-Time Operating
High Temp
4.5.3
A1
Operating High Temperature
4.5.4
A1
Altitude
4.6.1
A1
Decompression
4.6.2
A1
8,000 – 50,000 ft.
Overpressure
4.6.3
A1
Temperature Variation
5
Temperature Variation
5.3.1
C
Humidity
6
Humidity
6.3.1
A
Operational Shocks & Crash Safety
7
Operational Shocks
7.2.1
B
Crash Safety (Impulse)
7.3.2
B
Crash Safety (Sustained)
7.3.3
B
(9G)