Specifications

Rosen Aviation Smart Remote Display System
Document Number: 106957
Revision: A
Date: 03/13/14
Template: 4.4.1.6FM2; Revision A; 12/06/12
Page 15 of 24
7. MAINTENANCE OSD MENU
Note: Depending on the installation, the Maintenance OSD Menu may not be visible in the
application.
An interactive, on-screen display (OSD) menu for managing certain video settings on the RDM is
accessible through the Maintenance Mode of the Rockwell Collins’ application software.
There are two pages of OSD options, and you access the second page by selecting the
Advanced option, as shown below.
To choose a value, use the navigation commands left/up and right/down, and then choose
SELECT to confirm the setting. For more information about the navigational commands, refer to
the Rockwell application software.
Figure 10 Maintenance OSD Menu (page 1)
Note: The on-screen display will timeout and close automatically after no screen activity for
15 seconds.
7.1. Picture-quality Controls
The Brightness, Contrast, and Saturation menu options use control bars to fine-tune different
aspects of the picture quality on the RDM. To adjust these options, highlight the parameter to
open a control bar and adjust the value, similar to Figure 11 below.
Set the intensity level by increasing or decreasing the control’s value.
The adjustment range is 0 to 100.
Figure 11 Sample picture-quality control bar
Use Advanced
to open page 2
of the OSD
Yellow
highlight
shows which
option is active