Specifications

17” Fold Down Page 11
Support Here
Open the display to its fully-opened position. Carefully place
the shroud back onto the frame assembly by pressing it gently
into place. Press only as shown in the photo below; support
the shroud with one hand and press the hinge cover
“doghouse” onto the assembly. Ensure that all of the doghouse
clips snap into place.
Reinsert the (2) Pine Tree clips.
Replace the (4) 8-32 x 3/8 socket-head cap screws.
Once the assembly has been mounted, plug in the harness
and engage the side latch.
Installation Guidelines
Gently Press Doghouse Here