Manualshelf

Specifications

ManualsBrandsRosen Aviation ManualsComputer equipment7004 Series
12345678910
Rosen Aviation 7” Widescreen Display
Document Number: 106211
Revision: B
Date: 04/17/14
Template: 4.4.1.6FM2; Revision A; 12/06/12
Page 5 of 31
1. INTRODUCTION
Rosen’s new 7004 series of personal displays allow for direct upgrades for high-definition and
Composite units with a variety of existing bases on your aircraft. In addition to the sleek, tablet-
style display, the touch-sense front panel enables source select capability directly from the front
panel on select models depending on the base. The 7004 models differ depending on the plug-in
arm configuration and input signal. All SDI models (7004-3xx) support 3G HD-SDI up to 1080p,
and are compatible with the Rockwell Collins Venue™ system using RS-232.
This manual describes the compatibility of bases and display models, and it provides general
instructions about how to install the new arm-mounted displays onto your aircraft and confirm that
they are functioning correctly.
Note: Only trained and qualified personnel should perform installation and service.
Technical drawings and the Technical Manual are available on the Rosen Aviation website at
www.rosenaviation.com. From the home page, select the Products tab and browse by product
category. Please contact Technical Support at 541.342.3802 if you need assistance locating
product information.
1.1. Base Compatibility
The tables below show which bases are compatible with the new 7004 displays. For a
comparison of base-mounting diagrams, see Base Installations, beginning on page 12, to
compare. Bases are sold separately.
Table 1 Composite (CVBS) display and base compatibility
Display
Model
Base
Type
Base Model &
Aircraft Connections
7004-013
Micro-D
0100-002
0100-004
DB9 with
source select
7004-060
0100-005
Molex/BNC
without source
select
7004-061
7004-015
CVBS
Pogo
0100-041
0100-042
DB9 with
source select
7004-037
0100-040
Molex/BNC
without source
select