Specifications

Rosen Aviation 7” Widescreen Display
Document Number: 106211
Revision: B
Date: 04/17/14
Template: 4.4.1.6FM2; Revision A; 12/06/12
Page 26 of 31
8. MAINTENANCE: TENSION ADJUSTMENTS
The 7004 series displays require fewer tension adjustments than the older 7002 models. The new
monitor design features a lifetime friction hinge, so no tilt adjustment is ever required.
There are no adjustment points on the SlimLine SDI arms; however, the Composite arm mounts
have two adjustment points. Adjust the screen pivot and arm rotation, if necessary, by torquing the
socket head cap screws (SHCS), as shown below. Tighten both screws just until the screen pivots
and the arm rotates with only minor resistance.
Figure 30 Tension adjustment points for Composite arm mount displays
9. TECHNICAL REFERENCES AND SUPPORT
Check the Rosen Aviation website to ensure that you are working
with the most current revision of technical documentation.
If you need assistance in configuring a personal display to work with an HD system, please
contact Rosen Aviation Technical Support at 541.342.3802.
Table 3 Technical references
Product
Part Number
Location
RS-232 External Controller Message
Formats
9002934
Contact Rosen Technical Support
Displays’ Outline & Installation Drawings
7004-xxx-CD
www.rosenaviation.com
Base Outline & Installation Drawings
0100-xxx-CD
www.rosenaviation.com
Rotation adjust:
8-32 SHCS
Pivot adjust:
4-40 SHCS