Specifications

Rosen Aviation Remote Display System
Document Number: 105134
Revision: A
Date: 08/08/11
Template: 4.2.3-6-FM; Revision A; 16 May, 2005
Page 7 of 39
2. VIDEO INPUTS
The Rosen Remote Display System enables viewers to watch high definition video signals in a
variety of formats as well as standard video signals. The 0700-104 remote electronics box
supplies the following video inputs; however, the available inputs on other models will vary.
 Two 3G-SDI inputs
 Two composite (CVBS)
 Two DVI inputs (HDMI)
 RGB & Component (YPbPr) - through the DVI connectors only
 Accepts inputs up to 1080p, VGA-WUXGA
This unit can be controlled via an IR (infrared) remote interface, RS-232-based 7-button external
controller (P/N 0300-408), or RS-485 external inputs. The display connects to 28VDC aircraft
power and receives video through a video distribution amplifier or directly from video sources.
3. INSTALLATION GUIDELINES
You can mount the RMEB in any orientation with a minimum of six #8 screws (three per flange).
Figure 2 Dimensions for the mounting holes
Use care to prevent debris from entering the housing fan openings during installation.
(Dimensions are in inches)