Specifications
Rosen Aviation Remote Display System
Document Number: 105134
Revision: A
Date: 08/08/11
Template: 4.2.3-6-FM; Revision A; 16 May, 2005
Page 31 of 39
8.6.2. Constant Switch Mode
Constant enables you to specify the two sources the monitor will switch between when
the constant switch goes between an open state and a ground state.
Highlight TechnicianSource ModeSource Select and press ENTER.
Select Constant and press ENTER. Press ▼ to select Open and press ENTER.
Select which video input will be set in an open state and press ENTER.
Press ▼ to select Ground and press ENTER.
Select which video input will be to a ground state and press ENTER.
Select Back to return to the Technician Menu, or press EXIT to exit the OSD.
Figure 42 Source Select Constant options
9. TECHNICAL REFERENCES AND SUPPORT
Always check the Rosen Aviation website under the Products tab
to ensure that you are working with the most current revision of
technical documentation.
Table 3 Technical references
Product
Part Number
Location
Universal Color Remote Control
0500-020
www.rosenaviation.com
RS-232 7-button External Controller
0300-408
www.rosenaviation.com
Bezel Retention Hardware Kit
0500-021
Rosen Sales
If you need assistance in configuring a universal remote control to work with a remote display
system, please contact Rosen Aviation Technical Support at 541.342.3802.