Specifications

Rosen Aviation Remote Display System
Document Number: 105134
Revision: A
Date: 08/08/11
Template: 4.2.3-6-FM; Revision A; 16 May, 2005
Page 10 of 39
3.1.2. 24-inch RDMs
The following figures show the general dimensions for the 24” RDM mounting options.
Figure 6 Rear view of a 24” flush mount
Figure 7 Front view of a 24” flush or semi-proud mount from the front tabs
Four mounting
tabs with two
screws each
4-40 FHP
screws
Use a minimum
pattern of four
mounting points
#8-32 hardware