Reference Manual

1
Reference Manual
00809-0100-4045, Rev AB
Title Page
March 2016
Title Page
Rosemount
™
Wireless Pressure
Gauge
NOTICE
The products described in this document are NOT designed for nuclear-qualified
applications. Using non-nuclear qualified products in applications that require
nuclear-qualified hardware or products may cause inaccurate readings.
For information on Emerson
™
Process Management nuclear-qualified products,
contact your local Rosemount Sales Representative.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following conditions: This device may not cause harmful interference. This device must
accept any interference received, including interference that may cause undesired
operation.
Changes or modification not expressly approved by Rosemount Inc. could void the
user’s authority to operate the equipment.
Using the Rosemount Wireless Pressure Gauge in a manner other than what is specified
by the manufacturer may impair the protection provided by the equipment.
This device must be installed to ensure a minimum antenna separation distance of
20 cm (8 in.) from all persons.
Shipping considerations
The unit is shipped with the battery installed.
Each device contains one “D” size primary lithium-thionyl chloride battery. Primary 5.0
gram lithium batteries are regulated in transportation by the U.S. Department of
Transportation, and are also covered by IATA (International Air Transport Association),
ICAO (International Civil Aviation Organization), and ARD (European Ground
Transportation of Dangerous Goods). It is the responsibility of the shipper to ensure
compliance with these or any other local requirements. Consult current regulations
and requirements before shipping.