Installation & Assembly

HARDWARE LIST
A (8) 5/16” x 2 1/2” Hex Bolts
B (8) 5/16” Spring Washers
C (8) 5/16” Flat Washers
D (1) Open End Wrench
PARTS LIST
E (1) Table Top
F (4) Legs
QTYPART
8A
8C
HARDWARE QTYPART HARDWARE
8
1
B
D
CARE & MAINTENANCE : The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
AA
B
B
C
C
FIGURE 1
STEP 2 - Figure 1
Attach each Leg (F) to bottom side
of Table Top (E) using 2 Bolts (A),
2 Spring Washers (B) and 2 Flat
Washers (C). Tighten alll bolts with
Open End Wrench (D) provided.
The assembly is now complete.
STEP 1
With the help of a friend, place Table Top (E)
face down, on a clean smooth surface.
E
F
F
F
F
F
E
Dining Table
DROP LEAF TABLE
Page 1 of 1
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.