Instruction manual

Installation and Operations Manual
3
Features

Supports USB 1.1 or 2.0

Extend your workstation, USB devices, and audio up to 1640 feet
(500m) over industry standard CAT5 UTP solid core cable.

HD resolutions up to 1680x1050, 24-bit color depth are supported at
distances up to 1640ft (500m). The resolution does not degrade over
all supported distances.

Supports all USB 2.0 devices including keyboards, mice, web cams,
flash drives, speakers, microphones, and other USB devices

Operates with USB 2.0 high-speed host controllers and USB 1.1 host
controllers.

Standard USB hubs can be used to increase the maximum number of
connected USB devices to 13.

Up to 500 ma of power is available at each USB port on the receiver
unit for powering high-power USB devices

Plug-and-Play installation, no configuration or set-up needed.

Installation consists of:
1. Connecting the receiver to your USB device(s), DVI monitor,
USB keyboard and mouse, headphone or speakers and
microphone
2. Connect the transmitter to your computer’s USB port and DVI-D
monitor port.
3. Connect the transmitter to the receiver with up to 1640 feet (500
meters) of CAT5 UTP cable
4. Apply power and the installation is complete
Package Contents
The package contents consist of the following:
 The CrystalView DVI EX units (Transmitter and Receiver)
 2 power adapters (+5VDC-Transmitter / +24VDC-Receiver)
 6’ USB Type A / B cable
 5’ DVI-Dmm cable
 Documentation CD
Other cables are usually ordered separately. If the package contents are
not correct, contact Rose Electronics or your reseller so the problem can be
quickly resolved.