Datasheet
Technical information Technical information
Technical information
RO/SE Blechverarbeitung GmbH & Co. KG
Mooswiesenstr. 2; D-84364 Bad Birnbach
Tel.: 0049-(0)8563 / 976834 - Fax: 97 68 36
e-mail: ro-se@lm-heizungen.de
-Heizungen
Article: 185563; Typ HHS 630W:
Dimensions:
L: 150mm; W: 125mm; D: 80mm (without retaining)
Performance: 630 Watt;
Operating Voltage: 220-240 V AC
Fastening: retaining
Operate:
Connection of the equipment at current
supply only by specialist.
As the heaters should operate continuously,
fuse protection is best provided before the
main switch.
To utilize the units full heating capacity, it is
recommended the heater be mounted at the
lowest point of the control cabinets or
distributing switchboards.
The heating has an overheating thermostat.
RO/SE Blechverarbeitung GmbH & Co. KG
Mooswiesenstr. 2; D-84364 Bad Birnbach
Tel.: 0049-(0)8563 / 976834 - Fax: 97 68 36
e-mail: ro-se@lm-heizungen.de
-Heizungen
Article: 185563; Typ HHS 630W:
Dimensions:
L: 150mm; W: 125mm; D: 80mm (without retaining)
Performance: 630 Watt;
Operating Voltage: 220-240 V AC
Fastening: retaining
Operate:
Connection of the equipment at current
supply only by specialist.
As the heaters should operate continuously,
fuse protection is best provided before the
main switch.
To utilize the units full heating capacity, it is
recommended the heater be mounted at the
lowest point of the control cabinets or
distributing switchboards.
The heating has an overheating thermostat.
RO/SE Blechverarbeitung GmbH & Co. KG
Mooswiesenstr. 2; D-84364 Bad Birnbach
Tel.: 0049-(0)8563 / 976834 - Fax: 97 68 36
e-mail: ro-se@lm-heizungen.de
-Heizungen
Article: 185563; Typ HHS 630W:
Dimensions:
L: 150mm; W: 125mm; D: 80mm (without retaining)
Performance: 630 Watt;
Operating Voltage: 220-240 V AC
Fastening: retaining
Operate:
Connection of the equipment at current
supply only by specialist.
As the heaters should operate continuously,
fuse protection is best provided before the
main switch.
To utilize the units full heating capacity, it is
recommended the heater be mounted at the
lowest point of the control cabinets or
distributing switchboards.
The heating has an overheating thermostat.
LM
LM
LM