Specifications
77
NLUO PMC CONTRACTOR
SIGNATURE AND SEAL SIGNATURE AND SEAL SIGNATURE AND SEAL
The rates quoted for wood and joinery work shall include the cost for all types of anchor fastner or other approved
fasteners, cement grouting and fixing to frame work with screws etc all complete including materials, wastages , labour,
T&P hoisting and fixing in position at all heights and depths, Supplying two coats of creosote /so lignum air seasoning
of wood.
3.0 MS DOOR:
Fabrication and supply of MILD STEEL DOORS with Single Leaf outer frame made of 35x35x5 mm equal M.S L angle and
shutter frame made of 25 x25 x5mm equal M.S. L angle for horizontal and vertical members and the shutter frame
strengthened by stiffeners of 2 Nos. Horizontal and 3 Nos. diagonal using MS flat of size 20x5mm fully covered with 18 gauge
plain M.S full sheet welded with shutter frame neatly and also fixing by welding 6 Nos. of holdfasts, 1 No. of wind appliance ,
2 Nos. of tower bolts,1 No of aldrop,2 Nos of handles, fixing the shutter with 6 Nos. of hinges with outer frame of the door
including painting the whole unit with two coat of best quality of red oxide primer and enamel paint of approve shade.
4.0 AUTOMATIC ALUMINIUM ROLLING SHUTTER:
Supplying, fitting and fixing of perforated rolling shutters of 1. 77 mm. 1 layer slate of Aluminum material, Perforated with
honeycomb holes. Approved Make 1.HORMAAN,2.ALUTECH,3.FORMULA ONE, 4.DOVER with approved colour white /
beige, Rubber insert between slates,80 mm. guide rail with brushed inserts, Internal tubular motor, Remote controlled operation
as well as manual opening in case of power failure, Bottom slate with rubber, Nylon guide roller, Metal cover at the top, Manual
electrical switch, Thickness => at least 1 mm., Surface treating with Powder coating and Tubular Motor, of required
specification
1. Voltage => 220/230 50/60 HZ.
2. Power => 300/340 watt
3. Nominal Speed => 12 rpm.
4. Nominal torque => 80 Nm.
5. Lifting Weight => 192
6. Work time => 4 min.
7. Noise => <54
8. Insulation level => B










