Specifications

Model Description Company
The following is a partial list of the products (by model number) that we have supplied.
Please contact us as shown below for availability and pricing.
VT-1 Measure composite video signal gain and EQ levels
anywhere in a video system with the -to-use,
affordable and accurate VT-1 Video Tester. The
simple LED display provides remarkably accurate
results. Use the VT-1 to quickly and accurately set
gain and EQ adjustments on amplifiers, UTP
receivers, and Fiber Optic converters. Learn to use
in minutes; make measurements in seconds with
the VT-1, only from VAC!
VAC
VT20L
-10A/SC/LCD/WV
Video Transmitter, 10 Watt, L-Band, Frequency
Agile (1710-1850 MHz), 1 MHz Steps, Touchpad
Front Panel Control, One Audio Subcarrier (Specify
Mic. or Line Level Input), 12 VDC, Type "N"
Connector
VT40 Video Transmitter with audio subcarrier
- 1500 to 2499 MHz
- Frequency Agile
- Dual power 2 Watts and 0.25 Watts
- 11 to 16 VDC input
- 1 amp @ 2 Watts or 0.3 amp @ 250 milliwatts
- -20° to 70° C at baseplate
SEMCO
VX102M-R Receiver- Two Video Channel Radiant
VX102M-T Transmitter- Two Video Channel Radiant
VX104M-R Receiver- Four Video Channel Radiant
VX104M-T Transmitter- Four Video Channel Radiant
VX104M1-R Receiver- Four Video Channel
MM
1 fiber
Radiant
VX104M1-T Transmitter- Four Video Channel
MM
1 fiber
Radiant
150
Western Video, Inc., 31678 Railroad Canyon Rd., Canyon Lake, CA 92587
Phone: [phone] Fax: [phone] Email: [e-mail] or [e-mail]
Western Video, Inc., 5405 NW 102nd Ave., Suite 231,Sunrise, FL 33351
Phone: [phone] Fax: [phone] Email:[e-mail]