Instruction manual

Orion XC Installation and Operations Manual
89
 To make a KVM connection between a console and a CPU, double-click on the corresponding
selection box within the Full Access column and select the desired CPU.
 To make a video connection between a console and a CPU, double-click on the corresponding
selection box within the Video Only column and select the desired CPU.
 To make a Private Mode connection between a console and a CPU, double-click on the corresponding
selection box within the Private Mode column and select the desired CPU.
Note: CPUs to which a console does not have access rights will not appear in the selection list.
The following symbols are shown in the connection overview:
Symbol Description
CON device is connected with Shared Access with at least one additional console to the
same CPU. The CON device currently has a Full Access connection.
CON device is connected with Shared Access with at least one additional console to the
same CPU. The CON device currently has a Video Only connection.
Use the following buttons to perform a switching operation:
Notes:
When the Auto Send function in the left lower corner of the work area is selected, switching operations
will be completed immediately without needing to click the Send button.
When the Hide Devices w/o Extender Assignment function in the lower left corner of the work area is
selected, only CON and CPU Devices that are assigned to extenders are shown.
Method 2:
 Select Status > Matrix View in the task area or select Status > Grid Port View when using a Matrix
Grid.
Figure 90. Extended KVM Switching through Java Tool - Method 2 (From Matrix View Option)
Button Function
Send
Send desired switching operations to the matrix
Reset
Disconnect all existing connections within the matrix
Reload
Reload switching status list