Instruction manual

80
Orion XC Installation and Operations Manual
Figure 82. Extender Update in Standard Mode through the Java Tool - Step 2 (Update Firmware)
5. Start the actual update process by clicking the Update button.
Note: Just before update begins, all affected I/O boards will be put into Service Mode. Each will
be reactivated when its firmware update has completed.
Performing the Update in Expert Mode (sequential Update)
Take the following steps to prepare for the extender update.
1. Select Administration > Update EXT Firmware and select Expert Mode in the upper part of the
working area. All extenders eligible for update will be automatically selected and highlighted in
green.
Figure 83. Extender Update in Expert Mode – Step 1 (from the Java Tool)