Instruction manual

76
Orion XC Installation and Operations Manual
Setting Up a Matrix Grid through the OSD
In order to configure a Matrix Grid, proceed as follows. The following configuration steps have to be
repeated for each matrix switch in the grid separately.
1. Select Configuration > System in the main menu.
Figure 77. Setting Up a Matrix Grid through the OSD - Step 1
2. Enter into the Device field a unique name for the Matrix switch itself. No two matrix switches within the
Matrix Grid can use the same name.
3. Enter a name for the Grid into the Name field. The identical Grid name must be used in each matrix
within the Grid. Confirm these name choices by clicking the Okay button.
4. Select Configuration > Matrix Grid in the main menu.
Figure 78. Setting Up a Matrix Grid through the OSD - Step 2