Instruction manual

70
Orion XC Installation and Operations Manual
To save the active configuration as an external configuration file, proceed as follows:
1. Select File > Save As in the menu bar.
2. Enter a legal file name for the configuration.
3. Select the directory on the storage medium where it is to be saved.
4. Click the Save button.
Configurations are always saved in a file with the extension “dtc”.
Loading of Configurations (external)
Externally saved configurations are opened and activated in this menu. This menu can only be accessed
in the Java Tool.
Figure 72. Loading external configuration through the Java Tool
To load an external configuration file, proceed as follows:
1. Select File > Open… during offline-mode and select the storage location of the configuration file
that is to be opened.
2. Open the configuration by clicking the Open button.
3. Select File > Upload in the menu bar to transfer the opened configuration to the matrix. Enter the
necessary parameters.
4. Select Matrix > Connect in the menu bar to make a connection between the matrix and the Java
tool. Enter the necessary parameters.
5. Select Administration > Activate Configuration and select the configuration that has to be
activated.
6. Confirm the process with the Activate button.
The opened configuration has now been uploaded and activated.