Instruction manual

Orion XC Installation and Operations Manual
67
In Default and File #1 to File #8, the name and information records of the respective saved configuration
are shown. Each of these storage locations can be overwritten. The configuration stored in the Default
location will become the default configuration.
The storage location to be overwritten by the current configuration must be selected explicitly.
The current configuration is then saved to this storage location. The previously saved configuration at that
storage location is deleted.
To save the configuration into an internal matrix memory location, proceed as follows:
1. Select Configuration > Save As… in the main menu.
2. Select the desired storage location (File #1 – File #8, or Default).
3. Save the configuration by pressing the keyboard <Enter> key.
Saving Internal Configuration through the Java Tool
Figure 68. Saving Internal Configuration through the Java Tool
To save the configuration into the internal matrix memory, proceed as follows:
1. Select File > Upload in the menu bar.
2. Enter the IP address of the matrix, your user name and password and confirm the inputs with the
Next button.
3. Select the storage location in which the configuration is to be saved (default, or config01 -
config08) and confirm with the Finish button.