Instruction manual
66
Orion XC Installation and Operations Manual
Saving and Loading of Configurations
The menus described in this section provide a variety of ways to save and recall configurations, whether
currently active configurations, internally stored configurations, or configurations saved on media external
to the Orion XC equipment.
Active Configuration
This menu can only be accessed in the OSD.
Select Configuration > Save in the main menu.
By selecting this menu item, the admin user can save the active configuration of the matrix to its non-
volatile memory. By default, the last configuration saved in this way is restored as the active
configuration after a restart of the matrix.
Changing or saving configurations will block the matrix memory briefly, resulting in a freeze of all OSD
menus for a few seconds. The connections between consoles and CPUs are not affected.
If Auto Save is activated in the Configuration > System settings, an additional automatic saving of the
configuration will be performed periodically.
Saving of Configurations (internal)
This menu allows specifying a predefined internal storage location for saving the active configuration. This
does not replace the buffering of the Active Configuration described above. The menu can be accessed
from the OSD and the Java Tool.
Saving the Configuration to Internal Storage through the OSD
It is possible to save the created configuration to eight storage locations in the matrix (File #1 - File #8).
The configuration can also be saved as default configuration, to be restored whenever the matrix restarts.
Figure 67. Saving Internal Configuration
through the OSD
Active shows the current
configuration’s name and
information. This is the
configuration to be saved.