Instruction manual

56
Orion XC Installation and Operations Manual
Extender OSD
The Extender OSD settings can be adjusted. These local settings apply to individual consoles. The
settings can be accessed from the OSD and the Java Tool.
The following Extender OSD settings are available.
Field Selection Description
Activated
When opening the OSD with the key sequence, a CPU selection
list will be displayed in the center of the screen. Pressing <F7>
while the selection list is displayed opens the standard OSD.
Enable CPU
Selection
Deactivated Function not active (default)
Activated Enable Extender OSD (default)
Enable
Connection Info
Deactivated Function not active
Activated
Update connection changes during fade-in of Extender OSD
(default)
Update
Connection Info
Deactivated Function not active
Display Time
0-999 seconds Duration of OSD fade-in (default: 10)
Horizontal
Position
10 pixels
Horizontal OSD position (default: -2)
Vertical Position
10 pixels Vertical OSD position (default: 2)
Notes:
When setting the horizontal OSD position, a prefixed minus describes the location with respect to the
right edge of the monitor, e.g. -2 means 2 x 10 = 20 pixels of distance to this edge. When setting a
vertical position, a prefixed minus describes the location with respect to the bottom edge of the monitor.
If the Update Connection Info is deactivated, the Extender OSD only appears for switching via OSD.
Modifying Extender OSD Settings through the OSD


 Select Configuration > EXT Units in the main menu.
Figure 57. Modifying Extender OSD Settings through the OSD