Instruction manual

54
Orion XC Installation and Operations Manual
One or more CON Units (extender) must be assigned to the console device for it to access a CPU through
the matrix. To make an extender assignment, proceed as follows.
1. Select the console in the CON Devices list to be assigned an extender.
2. Select the extender in the Extender available list to assign to the CON Device.
3. Perform the assignment by clicking the > button. To assign all available extenders to the console,
click the >> button. The assignments are displayed in the Extender assigned list.
4. Confirm the assignment by clicking the Apply button.
To remove an extender assignment, proceed as follows:
1. Select the console to modify in the CON Devices list.
2. Select the extender to be removed from assignment to the console in the Extender assigned list.
3. Remove the assignment with the < button. To remove all existing assignments, click the << button.
4. Confirm the removal with the Apply button.
To configure a console’s CPU access rights, proceed as follows:
1. Select a console in the CON Devices list.
2. Select the CPU Access Control tab.
3. Assign access rights by using the right mouse button or the respective keyboard commands (see
the table below).
4. Confirm the configuration by clicking the Apply button.
The following keyboard commands can be used.
Function
Keyboard
Command
Add CPU to list Full Access
<F>
Add CPU to list Video Access
<V>
Add CPU to list No Access
<N>
Mouse and Keyboard
Mouse and keyboard behavior in the OSD menus can be configured in this menu. It can be accessed in
the OSD and the Java Tool.
The following settings are available.
Field Selection Description
Hor. Speed 1/x
1-9
Adjustment of the horizontal mouse speed,
1 = slow, 9 = fast (default value: 4)
Ver. Speed 1/x
1-9
Adjustment of the vertical mouse speed,
1 = slow, 9 = fast (default value: 5)
Double Click
100-800
Set the maximum time between 2 mouse clicks
for them to be recognized as a double click
(default value: 200 ms)
Keyboard Layout
Region
Set the keyboard layout used by the OSD to
match that of the keyboard in use (English US,
German, etc).
Video Mode
Variable or specific resolution Display resolution used for the OSD
Note: Mouse and keyboard settings are console specific and can be separately set for each console.