Instruction manual

Orion XC Installation and Operations Manual
53
Setting up CON Devices through the Java Tool
 Select Definition > CON Devices in the task area.
Figure 54. Setting Up CON Devices through the Java Tool
Select between the following buttons:
Button Function
New Device
Open a new CON Device
Delete Device
Delete a CON Device
Apply
Confirm a created CON Device
Cancel
Reject changes
>
Assign selected extender units
>>
Assign all available extender
units
<
Remove the selected extender
units
<<
Remove all extender units
The following keyboard commands can be used.
Function
Keyboard
Command
Change assignment number of the EXT unit upwards <+>
Change assignment number of the EXT unit downwards <->
To create a new console, proceed as follows:
1. Click the New Device button.
2. Select whether to create a real console (Create a real Console) or a virtual console (Create a
virtual Console), or whether a template of an existing console should be used (Choose
template).
Note: A template can only be selected if there is at least one existing CON device.
3. Click the OK button.
4. Make all parameter selections that are relevant for the console.
5. To confirm the creation of the new console, click the Apply button.