Instruction manual

50
Orion XC Installation and Operations Manual
Modifying CPU Settings through the Java Tool
 Select Definition > CPU Devices in the task area.
Figure 52. Modifying CPU Settings through the Java Tool
Select between the following buttons:
Button Function
New Device
Open a new CPU Device
Delete Device
Delete a CPU Device
Apply
Confirm a created CPU
Device
Cancel
Reject changes
>
Assign selected extender
units
>>
Assign all available extender
units
<
Remove the selected
extender units
<<
Remove all extender units
The following keyboard commands can be used.
Function Keyboard Command
Change assignment number of the EXT unit upwards <+>
Change assignment number of the EXT unit downwards <->
To create a new CPU device, proceed as follows:
1. Click the New Device button.
2. Select Create a real CPU or Create a virtual CPU. If a template of an existing CPU should be
used, select Choose template.
Note: A template can only be used, if there is at least one existing CPU device.
3. Click the OK button.
4. Select the desired parameters for the CPU.
5. To confirm the new CPU, click the Apply button.