Instruction manual

Orion XC Installation and Operations Manual
37
Date and Time
This menu allows changes to the Date and Time, based on Simple Network Time Protocol (SNTP). This
menu can be accessed in the OSD and the Java Tool.
The following settings can be modified.
Field Selection Description
Activated Enable network time server synchronization
SNTP Client
Deactivated Function not active (default)
SNTP Server
Byte Enter the SNTP server’s IP address (default: 000.000.000.000)
Time Zone
Region If SNTP is active, enter the time zone where the matrix is installed
Month
1-12 Enter month
Date
1-31 Enter date
Year
1-99 Enter year
Day of the week
1-7 Enter day of the week
Hours
0-23 Enter hour
Minutes
0-59 Enter minute
Seconds
0-59 Enter second
Note: Date format according to English notation.
Modifying Date and Time Settings through the OSD
 Select Configuration > Date+Time in the main menu.
Figure 39. Modifying Date and Time Settings through the OSD
To configure Orion XC to use a timeserver, proceed as follows:
1. Set the SNTP Client option to Y (Yes).
2. Enter the IP address of the SNTP server in the SNTP Server field.
3. Select the time zone for the region where the Orion XC is located in the Time Zone field.
4. Click the Okay button to confirm the settings.
5. Restart the matrix. The system time will now be synchronized with the SNTP server.