Instruction manual

Orion XC Installation and Operations Manual
35
Network
This menu contains the network configuration settings. It can be accessed in the OSD and the Java Tool.
The following Network settings can be modified.
Field Selection Description
Activated
The network settings are automatically supplied by a DNS server
Note: If DHCP is activated and there is no physical network connection
available, matrix boot time might increase.
DHCP
Deactivated Function not active (default)
IP address
Byte
Enter the IP address to be used when DHCP is inactive (default:
192.168.100.99)
Subnet Mask
Byte
Enter the subnet mask to be used when DHCP is inactive
(default: 255.255.255.0)
Gateway
Byte
Enter the gateway address in the form "192.168.1.1", to be used when
DHCP is inactive
Activated
LAN interface of the Orion XC activated for access via Java tool (API
service port 5555) (default)
API Service
Deactivated Function not active
Activated FTP server for transmission of configuration files activated (default)
FTP Server
Deactivated Function not active
Activated Enable Syslog Messages for status reporting (license key required)
Syslog
Deactivated Function not active (default)
Syslog Server
Byte Enter the Syslog server’s IP address in the form “192.168.1.1”
DEB
Activate debug messages in Trace (default: NO)
Note: The debug messages are exclusively for matrix diagnostics.
They should be activated only after consultation with Rose Electronics.
Otherwise, increased data traffic might limit the performance of the
equipment.
INF Activate information messages in Trace (default: NO)
NOT Activate notification messages in Trace (default: YES)
WAR Activate warning messages in Trace (default: YES)
Trace
ERR Activate error messages in Trace (default: YES)
DEB
Activate debug messages in Syslog (default: NO)
Note: The debug messages are exclusively for matrix diagnostics.
They should be activated only after consultation with Rose Electronics.
Otherwise, increased data traffic might limit the performance of the
equipment.
INF Activate information messages in Syslog (default: NO)
NOT Activate notification messages in Syslog (default: YES)
WAR Activate warning messages in Syslog (default: YES)
Syslog
ERR Activate error messages in Syslog (default: YES)
If changes are made to network parameters, save the changes and restart Orion XC to activate the
changes.
Note: Consult your system administrator before modifying the network parameters. Otherwise unexpected
results may occur, including failures with the network.