Instruction manual

DECLARATIONS OF CONFORMITY
This is to certify that, when installed and used according to the instructions in this manual, together with
the specified cables and the maximum CPU- cable length <3m, the Units listed in Appendix B are shielded
against the generation of radio interferences in accordance with the application of Council Directive
2004/108/EG as well as these standards:
EN 55022:2006 + A1:2007 (Class A)
EN 55024:1998 + A1:2001 + A2:2003
This equipment has been found to comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be required to correct the interference at
their own expense.
The product safety of the devices is proven by their compliance with the following standards:
IEC 60950-1A1:2010
EN 60950-1/A12:2011
UL 60950-1-2007
CAN/CSA-C22.2 60950-1-07
The manufacturer complies with the EU Directive 2012/19/EU on the prevention of waste electrical and
electronic equipment (WEEE). The device labels carry a respective marking.
These devices comply with Directive 2011/65/EU of the European Parliament and of the council of 8 June
2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(RoHS 2, RoHS II). The device labels carry a respective marking.