Instruction manual

Orion XC Installation and Operations Manual
111
SNMP
The SNMP function allows all function-critical and safety-critical elements of the matrix to be monitored
and queried. This function complies with the RFC 1157 standard. The SNMP option can be accessed from
the OSD and the Java Tool.
Note: When using SNMP monitoring, the use of a dedicated network to maintain continuous access is
strongly recommended.
SNMP Monitoring through the OSD
 Select Configuration > SNMP in the main menu.
Figure 108. SNMP Monitoring through the OSD
Set the Enable option to Y (Yes) in the SNMP Agent group. By activating this option, permission is
granted for an active query of the SNMP agent.
To configure a SNMP server through the OSD, proceed as follows:
1. Select Configuration > SNMP in the main menu.
2. Set the Enable Traps option to Y (Yes) in the SNMP Server group. This function allows an active
transmission of trap messages from the SNMP agent to the SNMP server.
3. Set the IP address of the SNMP server in Server Address.
4. Activate the requested traps by setting them to Y (Yes).
5. Confirm the selections by clicking the Okay button.
Note: To activate the SNMP agent or SNMP server, a restart of the matrix is necessary.