Instruction manual

94
Orion XC Installation and Operations Manual
Factory Reset
Resetting the system to factory defaults is available through the OSD and the Java Tool.
When a factory reset is done, all current settings and all configurations stored in the matrix will be lost.
This also applies to the network parameters (DHCP will be reset to N) and the admin password.
If firmware updates have been performed, the Orion XC will be set to the defaults defined in the most
recent firmware applied.
Resetting Through the OSD
1. Select Configuration > Factory Reset in the main menu.
2. Confirm the selection with the Okay button.
The Orion XC will be reset to factory settings.
Resetting Through the Java Tool
1. Select Matrix > Advanced Service > Factory Reset in the menu bar.
2. Confirm the selection with the Yes button.
Power Down
A complete system shutdown or a partial shutdown of an I/O board can be performed through the OSD.
To shut down the system, proceed as follows.
1. From the main menu, select Configuration > Shut down Matrix.
2. Confirm the selection with the Okay button.
The matrix will be shut down.
To shut down an I/O Board, proceed as follows.
1. From the main menu, Select Configuration > Shut down IO Board.
2. Confirm the selection with the Okay button.
The I/O board will be shut down.