Instruction manual

92
Orion XC Installation and Operations Manual
USB 2.0 Switching
Switching of USB 2.0 extenders works like the switching of KVM extenders. There are two options for
switching USB 2.0 extenders depending on how the extenders are configured in the Matrix.
1. An extender unit with USB 2.0 is created and assigned to an existing device which has KVM
extender units.
2. A separate device is created for the extender unit with USB 2.0 which has no KVM extender units
assigned to it. This allows switching of USB 2.0 devices independently from KVM devices.
Notes:
Switching of USB 2.0 signals uses Extended Switching functionality as described earlier in this
section.
When using parallel operation within the matrix, set the Release Time in the Configuration >
Switch menu to 10 s or more. Otherwise, the USB 2.0 extender connection will not be established
for reasons of security and stability.
Presets
This menu allows the creation and activation of predefined macros for switching the matrix without having
to load a new configuration. It can only be accessed from the Java Tool.
 Select Control > Presets in the task area.
Figure 92. Setting up Macro Presets through the Java Tool