UltraMatrix AV HD 16x16 HDMI VIDEO MATRIX SWITCH INSTALLATION AND OPERATIONS MANUAL 10707 Stancliff Road Houston, Texas 77099 Phone (281) 933-7673 www.rose.
LIMITED WARRANTY Rose Electronics warrants the UltraMatrix AV HD to be in good working order for one year from the date of purchase from Rose Electronics or an authorized dealer. Should this product fail to be in good working order at any time during this one-year warranty period, Rose Electronics will, at its option, repair or replace the Unit as set forth below. Repair parts and replacement units will be either reconditioned or new. All replaced parts become the property of Rose Electronics.
FCC/IC STATEMENTS, EU DECLARATION OF CONFORMITY Product UltraMatrix AV HD This equipment generates, uses and can radiate radio frequency energy and if not installed and used properly, that is in strict accordance with the manufacturer’s instructions may cause interference to radio communication.
TABLE OF CONTENTS Contents Page # Introduction.............................................................................................................................................................................. 2 Disclaimer ............................................................................................................................................................................ 2 Features ..............................................................................................
INTRODUCTION Introduction Thank you for choosing Rose Electronics® UltraMatrix AV™ HD for your HDMI video switching requirements. The UltraMatrix AV HD is designed especially for control rooms, video presentations, security centers, video wall displays, and many other digital media applications. The ease of switching video sources makes the UltraMatrix AV HD a versatile and flexible addition to your system. Up to 16 video sources can be switched to any selected output port.
Specifications Video HDTV Resolutions 480i, 480p, 720p, 1080i, 1080p Video Connectors (In / Out) HDMI Type A 19 pin Female TMDS Cable Length (In / Out) Up to 40 ft. Other Warranty Limited 1 Year Parts and Labor Control Panel, RS-232 (IR and TCP/IP optional) Power Internal 100-240 VAC Dimensions 19” W x 5.25” H (2U) x 7” D Weight 10 lbs.
System Application Figure 1.
INSTALLATION Installation Turn off all input devices and displays. Connect the male to male HDMI extension cables to the input devices and to the “IN” ports on the UltraMatrix AV HD. Connect the displays to the “OUT” ports on the UltraMatrix AV HD. Connect the power cord and power-on the UltraMatrix AV HD. Power on the input devices and the displays. Figure 2.
OPERATION Operation The UltraMatrix AV HD can be controlled using either the front panel or the RoseControl software. Front Panel Control Figure 3. Front Panel Buttons NOTE: To lock the front panel buttons to avoid any accidental changes, press ESC + MENU + ENTER + SWITCH at the same time. The display will indicate that it is locked. Repeat the procedure to unlock the front panel. During normal operation, you will see a list of ports on the front panel display: Figure 4.
To view the menu, press MENU. There are 6 menu options available: Figure 5. Main Menu RS-232 Acknowledge - Sets the UltraMatrix AV HD to send a confirmation that an RS-232 command has been received. Send Update - Sets the UltraMatrix AV HD to send an RS-232 command back to the controller when the configuration is changed via the front panel or remote control (optional). Memory Save - Sets the UltraMatrix AV HD to save the configuration when powered off.
Using the RoseControl Software Find the Installation CD that came with your UltraMatrix AV HD unit. This CD has the RoseControl software that you will need in order to control the unit using a computer. Insert the CD into your CD-ROM. On the CD you should see: RoseControl_Installer.exe RoseControl Help File UltraMatrix AV HD Manual in PDF format Double click RoseControl_Installer.exe in order to initiate software installation. Click Install. After installation has completed, click CLOSE.
Router Type: Select “Matrix DVI 16x16” Inputs/Outputs: Enter the number of Inputs/Outputs for your UltraMatrix AV HD (16x16). Com Port: Select the appropriate COM port that your computer is using to access the router. Router Time out: By default this is 0.2, meaning the computer acknowledges commands almost instantly. After you have entered the necessary information, click OK. This will now take you to the Main Routing Window where you can route the different HDMI connections. Figure 8.
Crosspoint Panel: This is probably the simplest way to route the connections. Simply click on the cross point itself. The input on the left will then be routed to the output above. Note: Inputs can be routed to several different outputs, but each output can only have a single input at any one time. So you can have several connections horizontally but not vertically. Figure 9.
The Button Panel: These are the numbered buttons across the top and left sides. Click an output button on the top, and then click an input button on the left. Options for using the Button Panel: Output Options: To select multiple outputs next to each other, click on one output, then hold the shift key down and click the last output. When the input is clicked, it is routed to all selected outputs. To select multiple outputs individually, hold the control key down and click on any number of outputs.
SERVICE INFORMATION Service Information Maintenance and Repair This Unit does not contain any internal user-serviceable parts. In the event a Unit needs repair or maintenance, you must first obtain a Return Authorization (RA) number from Rose Electronics or an authorized repair center. This Return Authorization number must appear on the outside of the shipping container. See Limited Warranty for more information.
SAFTEY Product Safety The UltraMatrix AV HD has been tested for conformance to safety regulations and requirements, and has been certified for international use. Like all electronic equipment, the UltraMatrix AV HD should be used with care. To protect yourself from possible injury and to minimize the risk of damage to the Unit, read and follow these safety instructions. Follow all instructions and warnings marked on this Unit.
APPENDICES Appendix A – Setting up the IP address on the UMA-16Hx16H/RCI The UMA-16Hx16H/RCI model has an embedded network access card. This is used to communicate with the unit over a network using a browser. Once the IP address has been set, the video switching can be accomplished through any web browser. The procedure to set the initial IP address for the unit is detailed below. The UMA-16Hx16H/RCI comes pre-configured with an IP address of 192.168.1.30 and IP network mask of 255.255.255.0.
5. If the correct User ID and Password are entered, the unit will display the following page in the browser. Figure 12. RoseControlIP Main Page 6. Select the Network Setting tab on the top of the page. This will display the network settings for the unit in the Network Setting page. Figure 13. RoseControlIP Network Setting page 7. Enter the desired IP address and network mask for the unit, and click the Activate button to apply the entered settings. 8.
10707 Stancliff Road Houston, Texas 77099 Phone: (281) 933-7673 WWW.ROSE.
