Instruction manual

40 UltraLink 2 DVI Installation and Operation Manual
The default EDID table of supported video modes should be sufficient for most applications. Click the Edit
Preferred, Standard & CVT Timing button to fine tune these settings if necessary.
Figure 53. Preferred, Standard & CVT Timing Screen
When the Save button is clicked, the on-board EDID table will be updated. Some computers only read the
EDID table during the boot sequence, so it may be necessary to cycle power on the host computer to cause it
to read the new EDID table from the UL2-DVI.
Advanced Unit Configuration
The Advanced Unit Configuration Screen is displayed when the Advanced Unit Configuration button is clicked
in the Unit Configuration Screen. This screen provides controls to further fine-tune operation of the UL2-DVI by
giving access to options that do not normally need modification.
Figure 54. Advanced Unit Configuration Screen