Instruction manual

CONFIGURATION
UltraLink 2 DVI Installation and Operation Manual 35
UltraLink 2 DVI Configuration and Maintenance
This section of the manual describes how to configure the UltraLink 2 DVI for optimal performance.
Maintenance of the unit by upgrading its firmware or resetting it to factory defaults is also discussed.
Configuration
The Configure button on the right-hand side of the VNC Viewer Toolbar is used to display the Configuration
Screen. Only the Administrator is allowed to configure the unit, so the Configuration button is displayed only
when a user logs in using the admin account.
The Configuration Screen offers a variety of options for optimizing the behavior of the UL2-DVI.
Figure 48. UL2-DVI Configuration Screen
The Logged on users field at the top-left of the Configuration screen is present on all configuration
sub-screens, and displays the names of all the users currently connected to UL2-DVI.
Each button in the Configuration screen opens up a new screen with the same name as the button, where
settings can be modified. The only exception is the Return To Host button, which closes the Configuration
screen and returns to the VNC Viewer Display window.
The Save and Cancel buttons are present on all the configuration sub-screens. Save saves all changes made
in a screen to the UL2-DVI, while Cancel aborts all changes.
Each configuration sub-screen is described in greater detail below.