Instruction manual

26 UltraLink 2 DVI Installation and Operation Manual
Controls Button and Menu
The Controls button can be used to modify keyboard, video and mouse settings. In addition, options to initiate
Virtual Media and display of useful information are accessed here. Each of these options is discussed in further
detail below.
Figure 37. Controls Button and Menu
Single Mouse Mode
This functionality was described in the section VNC Viewer Window Options.
Resync Mouse
This functionality was described in the section Re-Sync Mouse Button.
Refresh Screen
This functionality was described in the section VNC Viewer Window Options.
Mouse Control
The Mouse Control menu item presents a screen where the mouse actions can be emulated with buttons. This
is helpful when cursor on the host computer does not move synchronously with the connecting computer’s
cursor even after a Resync Mouse operation has been performed. Additional calibration options allow
restoration of the settings of a mouse that does not operate correctly.
Figure 38. Mouse Control Screen
The unlabeled buttons at the top of the menu emulate the mouse button action. From left to right, clicking the
buttons in the top row produces a single left button, middle button or right button mouse click. The buttons on
the second row of the screen produce click and hold button action for same mouse buttons. The arrow buttons
move the mouse cursor in the indicated direction.