Instruction manual

18 UltraLink 2 DVI Installation and Operation Manual
Basic Tab
The Basic button is present on each of the four tab menus described above. When the button is clicked, the
four tabs are replaced by a single Basic tab. This tab contains only the most commonly used features from the
Display and Inputs tab.
Figure 22. VNC Viewer Options - Basic tab
The following options vary slightly from their function in the Advanced view.
Scale to window size:
The variety of scaling options offered in the advanced view is simplified to Scale to window size. Clearing the
check mark for this feature is equivalent to selecting No scaling in the advanced view.
View Only:
This option box corresponds to the Inputs field of the Inputs tab in the advanced view. Checking the box is the
same as selecting Disabled in the Inputs field. When it is not checked, it is equivalent to selecting Enabled in
the Inputs field.
Pass special keys directly to VNC server:
This option is dependent on the View Only field, and is available only when the View Only option box is not
checked. It has the same function as the selection in the advanced view.
Advanced:
Pressing the button switches the VNC Viewer Properties back to the Advanced view with the four tabs.