Instruction manual

UltraLink 2 DVI Installation and Operation Manual 11
Note: As noted earlier, the newer VNC Viewers from the RealVNC website do not have audio support. If
transmission of audio is also desired, choose option 2 and use the VNC Viewer downloaded from the unit.
Select option 1 (Connect using built-in Java VNC Viewer) or option 2 (Download Windows VNC Viewer from
unit) to connect to the computer. A connection screen will be displayed requesting the IP address of the UL2-
DVI to connect to. If the address is not already filled in, enter the IP address of the unit here. In the case of
initial configuration of a unit, enter the default IP address of 192.168.1.42.
Figure 11. IP Connection screen
An access logon screen will be displayed. Enter the Username “admin” and no Password. This is the default
logon for the administrator, and can be changed later in the User Settings.
Figure 12. Login User Authentication Screen
The host computer’s video will display in the browser’s VNC window. Click on the “Configure” button in the
upper right corner. This displays the configuration menu.
Figure 13. Accessing UL2-DVI Configuration
In the configuration menu, click the “Network Configuration” button. It will display the Network Configuration
menu. The UltraLink 2 DVI is capable of supporting both IPv4 and IPv6 network addresses, and both types can
be set up from the Network Configuration menu. More information on this can be seen in the section on
Network Configuration later in the manual. The example below demonstrates how to change the unit’s network
address to an IPv4 address.
Click on the Configure button to
display the configuration menu