Instruction manual

MODELS
UltraLink 2 DVI Installation and Operation Manual 5
UltraLink 2 DVI Models
The UL2-DVI comes in a single model as shown below.
Front View
Figure 1. UL2-DVI Front View
Connectors:
 USB Type B Connector labeled KM: This
connector provides keyboard and mouse
output from the UL2-DVI to the computer.
 USB Type B Connector labeled VM: This
connector is used to facilitate Virtual Media.
When the unit is not powered with a power
adapter, power for the unit is drawn from the
host computer through both USB
connectors.
 DVI-D Single-Link Connector labeled with a
monitor logo: This connector provides video
input to the unit.
Rear View
Figure 2. UL2-DVI Rear View
Connectors:
RJ45 Connector labeled Link: Connect the unit
to the LAN or internet using this connector.
RS232 Connector labeled Serial: This
connector can be used to control a Power
Control Switch.
3.5 mm stereo audio jack labeled In Audio:
Audio input from the host computer is provided
through this connector.
3.5 mm barrel jack labeled Power: Power for
the unit is drawn either from the host computer
through the two USB connections, or directly
from the AC mains. If the power is to be drawn
from the AC mains, the optional power adapter
here is connected here.