Specifications

Certication:
· Certied by BHMA to be in compliance
with ANSI 156.13-2002 American
National Standard for mortise locks and
latches. Grade 1 level for both security
and operational requirements
· Certied by BHMA to be in compliance
with ANSI 156.25-2005 American Na-
tional Standard for electried locking
devices
· Certied by Underwriters Laboratories
for use on re doors up to a three-hour
rating
When ordering specify:
· Total number of locksets and spares
· Desired nish
· Door thickness and composition (wood
or metal)
· Door preparation – consult SAFLOK for
template
· Door frame compositionwood or
metal frame and strike plate measure-
ments
Specications
All SAFLOK MTs are prepared to accept standard
ASA 4-7/8” (125 mm) strike plate. Lock specica-
tions may change without notice.
· Mortise lock available in standard func-
tion, ADB function, or mechanical key
override with 1” (25 mm) throw dead
bolt and 3/4” (19 mm) dead-locking
latch bolt
· 2-3/4” from door edge to lever (back-
set)
· Operates on standard AA alkaline bat-
tery pack
· Door thickness range 1-3/4”– 2-1/8” for
standard product
Options:
· Spacer plate available for retrotting
1-3/8” thick doors
· Custom designs available for thicker
doors
· Escutcheon: 9-3/4” (248 mm) x 3-1/2”
(89 mm)
· Armored front: 8” (203 mm) x 1-1/4” (32
mm) or 8” (203 mm) x 1-1/16” (27 mm)
Saflok MT™
Battery pack
Silicone
FLASH memory
ASIC
Dead latch
Automatic deadbolt
1 deadbolt
137