Rackview Switch - with integrated 8-port KVM Switch INSTALLATION AND OPERATIONS MANUAL Rackview Switch With 17” or 19” LCD 1280 x 1024 10707 Stancliff Road Houston, Texas 77099 Phone: (281) 933-7673 WWW.ROSE.
LIMITED WARRANTY Rose Electronics warrants the Rackview Switch to be in good working order for one year from the date of purchase from Rose Electronics or an authorized dealer. Should this product fail to be in good working order at any time during this one-year warranty period, Rose Electronics will, at its option, repair or replace the Unit as set forth below. Repair parts and replacement units will be either reconditioned or new. All replaced parts become the property of Rose Electronics.
TABLE of CONTENTS Contents Page # Disclaimer ...................................................................................................... 1 System Introduction ....................................................................................... 1 Features ..................................................................................................... 2 Package contents ....................................................................................... 2 Product Registration............
INTRODUCTION Disclaimer While every precaution has been taken in the preparation of this manual, the manufacturer assumes no responsibility for errors or omissions. Neither does the manufacturer assume any liability for damages resulting from the use of the information contained herein. The manufacturer reserves the right to change the specifications, functions, or circuitry of the product without notice.
Features (1 x 8 DVI-I USB Switch) Available with 8 DVI-I video ports Supports local USB keyboard and mouse Push-buttons or hotkey switching User definable keyboard hotkey sequence Switch USB hub, speaker and microphone jointly with the PC selection or independently USB 2.0 compliant 2 port USB hub for connecting shared USB devices. Scanning feature, scans through each PC connection at a fixed or programmable rate (Fixed = 5 sec. / Programmable = 10–100 sec.
Product Registration Take advantage of the following when you register your Rose Electronics products online at http://www.rose.com/htm/online-registrationform.htm.
MODEL Model Description 17” or 19” RackView Full Size Keyboard Separate numeric keypad Touchpad mouse 8x PC selector buttons On-screen menu Fold forward – lockable drawer 19” rack mountable Integrated 1 x 8 DVI USB KVM Switch 1 x 8 DVI USB KVM Switch Computer connections 8 DVI-I PC ports 8 USB ports (Kbd / Mouse) 8 Speaker connectors 8 Microphone connectors 2x USB2.
INSTALLATION The first installation procedure is to strategically install the unit in a 19” rack so all CPU connection cables do not exceed the recommended cable lengths. The recommended max DVI-I cable length is 16 feet (5 meters); USB max cable length is 13 feet (4 meters). If longer cable lengths are needed, Rose Electronics has a range of DVI and USB extenders that can extend the DVI/USB cable lengths up to 400ft (140m) over CATx cable.
The default settings for the unit are appropriate for most systems and no initial configuration is needed. When the unit is securely installed in a 19” rack you can start connecting the computers, USB devices, speakers, and microphone. Please observe proper strain relief techniques to reduce the stress on the connectors. It is recommended that the following installation process be followed to assure the switch properly recognizes the connected computers, keyboard, and mouse types.
OPERATION System Operation Operating the system can be done by using the PC push buttons or by hotkey commands from the RackView Switch keyboard. The USB and audio features of the switch can be jointly switched when you switch computer ports or can be switched independently. Using hotkey commands, you can bind the audio and/or USB to the video or un-bind them and switch the audio and USB functions separately.
HotKey and Push-Button command description The following table describes each of the available HotKey commands and the corresponding push button action.
HotKey Command Examples Initial conditions – HotKey sequence = [ScrLk] + [ScrLk] Binding is enabled for the Audio/Mic & USB port Function HotKey Command Sequence 1 Switch to CPU port #1 [ScrLk] + [ScrLk] + 1 2 Switch to CPU port #3 [ScrLk] + [ScrLk] + 3 3 Unbind PC and Audio / Mic [ScrLk] + [ScrLk] + W 4 Switch to CPU port #5 [ScrLk] + [ScrLk] + 5 (keyboard / monitor / mouse and USB to computer on port #5 - Audio / Mic are connected to CPU port #3 5 Unbind PC and USB Hub [ScrLk] + [ScrLk] +
SERVICE and SUPPORT Service Information Maintenance and Repair This Unit does not contain any internal user-serviceable parts. In the event a Unit needs repair or maintenance, you must first obtain a Return Authorization (RA) number from Rose Electronics or an authorized repair center. This Return Authorization number must appear on the outside of the shipping container. See Rose Limited Warranty for more information.
SAFETY Safety The Rackview Switch has been tested for conformance to safety regulations and requirements. Like all electronic equipment, this Unit should be used with care. To protect yourself from possible injury and to minimize the risk of damage to the Unit, read and follow these safety instructions. Follow all instructions and warnings marked on this Unit. Except where explained in this manual, do not attempt to service this Unit yourself. Do not use this Unit near water.
APPENDICES Appendix A – General Specification LCD Depth Height Weight 17” 23.3” / 592mm 1.7” / 44mm 28.7lbs/ 13kg 19” 22.4” / 642mm 1.7” / 44mm 30.9lbs / 14kg Rail Depth Standard (Max Depth) Option (Max Depth) 17” 31.5” / 800mm 39.37” / 1000mm 19” 31.5” / 800mm 39.
SAFETY Video Input Resolution Dimensions Bandwidth Connectors Power Source Operating Temp Storage Temp Reltv Humidity DVI - KVM Switch Single Link DVI-I Up to 1920x1200, 1080p 16.0x3.94x1.74 (“) 406x100x42(mm) 165Mhz 8x DVI-I In. The local port of the switch (DVI-I 8x USB-B In. and USB-HID) works in parallel with 8x Audio In. the Rackview 2x USB 2.0 1x DC power 12 VDC/4.
Appendix B – Part Numbers Part Number Description RV1-CSKVT17/KVM-8TDVI/A1 17” RackView/1x8 DVI-I USB KVM Switch RV1-CSKVT19/KVM-8TDVI/A1 19” RackView/1x8 DVI-I USB KVM Switch CAB-DVIDMM006 DVI to DVI male cable CAB-USBAB006 USB Type A to USB Type B cable CAB-SPMM006 3.
The enclosed rackmount rail brackets can be used to mount the Rackview Switch product in a standard 19” wide x 19.8” – 32.5” deep computer rack. Extension brackets are included that can be added to fit in computer racks 32.5” – 39.4” deep. Extension Brackets Rack cabinet installation (Note: left and right brackets are different) 1. Loosen the four screws on the rear of each bracket. This allows the rear portion of the bracket to slide in and out. (Do Not fully remove the four screws) 2.
Step 3 4. With both left and right brackets installed in the computer rack, align the unit side rails with the rack installed brackets and carefully slide the unit into the mounted brackets. It is recommended that two people install the unit into the mounted brackets. The unit will not slide to the end of the rack due to the locking mechanism. Unlock the drawer 5. On each side of the unit there is a rail-lock switch.
Step 7 Mounting Screws (6) Extension Rail Installation To mount the Unit in a computer rack that is 32.6” – 39.4” deep, the extension rails must be installed. To install the extension rails: 1. First remove the six mounting screws that secure the short rail bracket. 2. Remove the short rail brackets from the rack rail (each side) 3. Install the longer extension rails and adjust the length to fit the computer rack 4. Secure the extension rail to the rack rail with 2 or 3 screws.
Step 10 Step 11 Install a min of 2 screws Installation and Operations Manual 19
NOTES Installation and Operations Manual 21
WWW.ROSE.COM sales@rose.
